Aztech

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, (yang lain jangan ada yang dirubah), Submit
5. Save Settings
6. Restart Router

Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nmrspeedy@telkom.net), Password: (password speedy), VPI: 8, VCI: 81, (yang lain jangan ada yang dirubah), Submit
5. Save Settings
6. Restart Router

Dareglobal

Default IP : 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Centang Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot

Setting PPPoE
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Masukkan PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password speedy); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot

D-Link

DSL-302T

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Setup
2. Pilih Connection
3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
4. Pilih Tools
5. Pilih System Commands, Save All, Restart

Setting PPPoE
1. Pilih Setup
2. Pilih Connection
3. Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: (nmrspeedy@telkom.net); Password: (password speedy); VPI=8; VCI=81, Apply
4. Pilih Tools
5. Pilih System Commands. Save All, Restart

Linksys

AM300

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Setup
2. Pilih Basic Setup
3. ADSL Settings, Encapsulation: RFC 1483 Bridged, Autodetect: Disable, VPI: 8, VCI: 81, Multiplexing: LLC, DSL Modulation: Auto
4. Pilih Save Settings

Setting PPPoE
1. Pilih Setup
2. Pilih Basic Setup
3. ADSL Settings, Encapsulation: RFC 2516 PPPoE, Autodetect: Disable, VPI: 8, VCI: 81, Multiplexing: LLC, DSL Modulation: Auto
4. PPPoE Settings: Username: (nmrspeedy@telkom.net), Password: (password speedy), Keep Alive
5. Pilih Save Settings

SMC

Default IP: 192.168.2.1

Default password: smcadmin

Setting Bridge

1. Klik WAN

2. Klik ATM PVC

3. Klik VC1

4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10

5. Klik Save Settings

Setting PPPoE

1. Klik WAN

2. Klik ATM PVC

3. Klik VC1

4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: (nmrspeedy@telkom.net), Password: (password speedy), Confirm Password: (ulangi password), MTU: 1492

5. Save Settings

TP-Link

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Centang Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot

Setting PPPoE
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Masukkan PPP Username: (nmrspeedy@telkom.net); PPP Password: (password speedy); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot

Sumber : telkom speedy

Keterangan : Janganlah kalian menjadi seorang Flagiat saja, tapi anda harus tahu cara mempraktekannya